Self-Adhesive Foam Tapes for HVAC, Glazing, Construction and Industrial Applications

Blueline International manufactures and supplies self-adhesive foam tapes in the UAE and Saudi Arabia for sealing, gasketing, cushioning, insulation and industrial bonding applications.

Our product range includes single-sided and double-sided PE foam tape, EVA foam tape, EPDM foam tape, nitrile foam tape, PVC foam tape, acrylic foam tape, duct gasket tape and high-bond structural glazing tape.

Standard and custom widths, thicknesses, roll lengths, foam densities and adhesive systems are available according to application requirements.

We support HVAC manufacturers, duct fabricators, façade contractors, glazing companies, MEP contractors, insulation companies, equipment manufacturers and industrial customers throughout Dubai, Abu Dhabi, Sharjah, Ajman, Riyadh, Jeddah and Dammam.

Whether you require a foam tape manufacturer in the UAE, a foam tape supplier in Dubai, or a double-sided foam tape supplier in Saudi Arabia, Blueline can help you select a suitable foam and adhesive combination.

Request a Foam Tape Quotation

Send us the required foam material, colour, thickness, width, roll length, adhesive type, quantity and intended application.

Email: ask@blineintl.com
Website: www.blineintl.com
Markets served: UAE and Saudi Arabia

[REQUEST A QUOTATION]

Our Foam Tape Product Range

Single-Sided Foam Tape

Single-sided foam tape consists of a flexible foam carrier coated with pressure-sensitive adhesive on one surface. A release liner protects the adhesive until installation.

It is commonly used for:

• HVAC duct gasketing
• Thermal insulation joints
• Equipment sealing
• Door and panel gasketing
• Vibration cushioning
• Gap filling
• Weather sealing
• Sound and air-leakage reduction
• Protective padding
• Construction joints

Available materials include:

• EVA foam
• PE foam
• EPDM foam
• Nitrile foam
• PVC foam
• Neoprene-blend foam
• Acrylic foam

The adhesive may be selected according to the substrate, installation temperature, operating temperature and required service life.

Double-Sided PE Foam Tape

Blueline supplies double-sided PE foam tape in the UAE for mounting, joining, cushioning and general industrial bonding.

The closed-cell polyethylene foam carrier helps compensate for minor surface irregularities while the adhesive on both sides bonds the two components.

Typical applications include:

• Signage and display mounting
• Nameplates
• Decorative panels
• Aluminium profiles
• Electrical components
• Automotive accessories
• Glass and mirror applications
• General assembly
• Construction accessories
• Industrial fabrication

Available options include:

• White, black or grey foam
• Different foam densities
• Acrylic or rubber-based adhesive
• Different thicknesses
• Standard and custom widths
• Custom roll lengths
• Finger-lift liner where required
• Die-cut pads and shapes

The suitability of double-sided PE foam tape depends on the substrate, surface energy, load, temperature, environmental exposure and required durability.

EVA Foam Tape

EVA foam tape provides a flexible and economical solution for gasketing, cushioning, insulation and gap filling.

We supply single-sided and double-sided EVA foam tapes for:

• HVAC duct fabrication
• Air-conditioning components
• Equipment enclosures
• Electrical panels
• Construction joints
• Packaging and protection
• General industrial assembly
• Door and window sealing
• Noise and vibration cushioning

Customers requesting an EVA single-sided foam tape price should provide:

• Tape thickness
• Tape width
• Roll length
• Foam density
• Foam colour
• Adhesive requirement
• Release-liner requirement
• Required quantity

The price can vary significantly depending on the foam specification, adhesive chemistry, roll dimensions and order volume.

Blueline supports buyers searching for EVA foam tape suppliers in Jeddah, Riyadh, Dammam, Dubai and other UAE and Saudi locations.

EPDM Foam Tape

Blueline supplies open-cell and closed-cell EPDM foam tape in the UAE and Saudi Arabia for weather sealing, gasketing and construction applications.

EPDM foam offers strong resistance to:

• Weathering
• Ozone
• UV exposure
• Water
• Ageing
• Outdoor environmental conditions

Typical applications include:

• Façade and glazing systems
• Aluminium windows and doors
• Roofing components
• HVAC panels
• Outdoor enclosures
• Construction joints
• Equipment housings
• Weather seals
• General industrial gasketing

Companies searching for an EPDM foam tape supplier in Saudi Arabia can request standard rolls or custom-slit widths according to their application.

EPDM is generally preferred for outdoor weathering applications but is not recommended for continuous exposure to petroleum oils.

Nitrile Foam Tape for HVAC

We supply nitrile foam tape for HVAC applications in the UAE and Saudi Arabia.

Nitrile rubber foam tape is commonly used with thermal-insulation systems because of its flexibility, closed-cell structure and suitability for HVAC environments.

Applications include:

• NBR insulation joints
• Chilled-water pipe insulation
• Air-conditioning duct insulation
• Refrigeration lines
• Equipment insulation
• Thermal barrier joints
• Insulation-sheet overlaps
• Vapour-sealing support

The selected tape should be compatible with the insulation material and operating conditions.

For thermal-insulation systems, foam tape should be installed according to the insulation manufacturer’s method. It should not be treated as the sole vapour barrier unless it is designed and approved for that purpose.

Acrylic Foam Tape

Acrylic foam tape is a high-performance double-sided tape used for mounting and bonding applications requiring improved conformability, stress distribution and long-term holding performance.

Blueline supplies acrylic foam tapes for:

• Metal-panel bonding
• Aluminium profiles
• Signage
• Automotive accessories
• Appliance assembly
• Industrial components
• Decorative trim
• Façade components
• Glass and glazing accessories
• Construction assembly

Available options may include:

• Clear acrylic foam tape
• Grey acrylic foam tape
• Black acrylic foam tape
• Different thicknesses
• Different adhesive strengths
• Custom widths and roll lengths
• High-temperature acrylic adhesive
• Die-cut acrylic foam components

Customers looking for an acrylic foam tape manufacturer in Dammam or an industrial supplier elsewhere in Saudi Arabia can submit the substrate and performance requirements for product selection.

High-Temperature Acrylic Foam Tape

We supply high-temperature acrylic foam tape in Saudi Arabia and the UAE for applications requiring better resistance to elevated service temperatures than general-purpose rubber-based adhesive tapes.

It may be suitable for:

• Metal fabrication
• Equipment panels
• Automotive parts
• Industrial assembly
• Aluminium profiles
• Electrical enclosures
• Signage
• Construction accessories

Temperature performance depends on:

• Acrylic formulation
• Foam carrier
• Adhesive coat weight
• Exposure duration
• Applied load
• Substrate
• Installation temperature

The short-term temperature rating should not be presented as the continuous service-temperature rating. The specific technical data sheet must be checked before approval.

Acrylic Foam Tape for Structural Glazing

Blueline supplies acrylic foam tape for structural glazing applications in Dubai and across the UAE.

In structural silicone glazing systems, double-sided spacer tape may be used to:

• Maintain the required silicone bite and thickness
• Provide temporary positioning during silicone curing
• Separate glass from the aluminium frame
• Support controlled joint geometry
• Create a clean glazing interface

The tape must be compatible with the approved structural silicone, glass coating, aluminium finish and façade-system design.

Important: Foam tape must not be assumed to replace structural silicone or mechanical retention unless the complete bonding system has been specifically designed, tested and approved for that purpose.

Façade contractors should obtain approval from the silicone manufacturer, system supplier and project consultant before installation.

High-Bond Acrylic Foam Tape

High-bond acrylic foam tapes are sometimes searched for using the term VHB foam tape in Saudi Arabia.

“VHB” is a trademark associated with a specific manufacturer. Blueline can supply high-bond acrylic foam tape alternatives according to the required performance, but alternative products should not be represented as branded VHB tape unless they are supplied under the original brand.

When requesting high-bond acrylic foam tape, provide:

• Substrate materials
• Bonded area
• Static or dynamic load
• Indoor or outdoor use
• Operating temperature
• UV and weather exposure
• Required tape thickness
• Required colour
• Expected service life
• Applicable approval requirements

Performance should be verified by application testing before production use.

Closed-Cell Polyethylene Foam Tape

Closed-cell polyethylene foam tape is widely used for sealing, mounting, insulation and cushioning.

Its closed-cell structure provides:

• Low water absorption
• Gap-filling capability
• Flexible cushioning
• Thermal-insulation support
• Resistance to air leakage
• Conformability to minor surface variations
• Clean and efficient installation

Common applications include:

• HVAC duct flanges
• Aluminium fabrication
• Electrical panels
• Door and window frames
• Equipment covers
• Roofing accessories
• Signage
• General industrial assembly

PE foam tape can be supplied with single-sided or double-sided adhesive.

Waterproof Foam Sealing Tape

Blueline supplies waterproof foam sealing tape in the UAE for construction, HVAC, aluminium and industrial applications.

Closed-cell PE and EPDM foams can help restrict water, air and dust penetration when properly compressed and installed.

Applications include:

• Door and window frames
• Metal panels
• HVAC enclosures
• Roof accessories
• Aluminium profiles
• Electrical cabinets
• Machinery covers
• Construction joints
• Outdoor equipment

The performance of a foam seal depends on joint design, compression level, surface condition and exposure.

“Water-resistant” and “waterproof” are not always technically equivalent. For joints exposed to hydrostatic pressure or continuous immersion, project-specific testing and approval may be required.

PVC Foam Tape

PVC foam tape is a flexible sealing and gasketing material used in HVAC, construction, automotive and industrial applications.

Typical uses include:

• Duct flanges
• Access panels
• Equipment doors
• Electrical enclosures
• Glazing support
• Signage
• Automotive trim
• Dust and air seals

PVC foam offers good conformability and can be supplied with single-sided or double-sided adhesive.

The suitability of PVC foam for high temperatures, outdoor weathering or specific chemical environments should be confirmed against its technical data.

Foam Tape for HVAC Duct Gasketing

Foam tape is installed between duct flanges, access panels and equipment components to help reduce air leakage, vibration and metal-to-metal contact.

Our HVAC tape range includes:

• EVA foam tape
• PE foam tape
• EPDM foam tape
• Nitrile foam tape
• PVC foam tape
• Duct gasket foam tape
• Single-sided foam tape
• Closed-cell foam sealing tape

Available sizes can include narrow-width rolls for flange applications and wider tapes for equipment and panel gasketing.

For HVAC applications, important selection factors include:

• Closed-cell or open-cell structure
• Foam density
• Compression recovery
• Adhesive bond strength
• Operating temperature
• Humidity and condensation
• Surface cleanliness
• Required service life
• Fire-performance requirements

Where fire performance is specified, the finished tape construction—not only the base foam—should be supported by appropriate documentation.

Single-Sided vs Double-Sided Foam Tape

Single-Sided Foam Tape

Single-sided tape is normally used for:

• Gasketing
• Gap filling
• Sealing
• Cushioning
• Insulation joints
• Protective padding

One surface is adhesive, while the exposed foam surface compresses against the adjoining component.

Double-Sided Foam Tape

Double-sided tape is normally used for:

• Mounting
• Joining
• Panel bonding
• Profile attachment
• Signage
• Component assembly

Both surfaces are adhesive, allowing the foam carrier to bond two materials together.

The correct type depends on whether the tape must function primarily as a seal or as a bonding component.

Available Adhesive Systems

Solvent Acrylic Adhesive

Solvent acrylic adhesive generally provides:

• Good ageing resistance
• Better temperature resistance
• Good UV performance
• Stronger long-term durability
• Suitability for demanding HVAC and outdoor applications

Hot-Melt Rubber Adhesive

Hot-melt adhesive generally provides:

• Strong initial tack
• Fast bonding
• Economical production
• Good performance for indoor applications
• Suitability for clean, dry surfaces

However, hot-melt adhesive may have lower resistance to heat, ageing and outdoor exposure than a suitable acrylic adhesive.

Water-Based Acrylic Adhesive

Water-based acrylic systems can provide good general-purpose performance with lower solvent content. Final suitability depends on the formulation and application conditions.

The adhesive should be selected according to the required service life rather than initial tack alone.

Custom Foam Tape Manufacturing

Blueline provides custom foam-tape manufacturing and converting support for UAE and Saudi projects.

Custom options include:

• Tape width
• Foam thickness
• Roll length
• Foam density
• Foam colour
• Single-sided adhesive
• Double-sided adhesive
• Solvent acrylic adhesive
• Hot-melt adhesive
• Water-based acrylic adhesive
• Release-liner material
• Finger-lift liner
• Printed release liner
• Die-cut shapes
• Gasket rings
• Kiss-cut components
• Individual adhesive pads

Custom products may require minimum manufacturing quantities, tooling costs and production lead time.

How to Select the Correct Foam Tape

Identify the Application

Determine whether the tape is required for sealing, gasketing, insulation, cushioning or structural mounting.

Check the Substrate

Adhesion differs on:

• Aluminium
• Galvanized steel
• Stainless steel
• Glass
• Plastic
• Painted metal
• Powder-coated surfaces
• Concrete
• Rubber insulation
• Wood

Low-surface-energy plastics may require a specially formulated adhesive or primer.

Confirm the Operating Temperature

Consider both the installation temperature and the continuous service temperature.

Review Environmental Exposure

Check for:

• UV exposure
• Water and condensation
• Humidity
• Oil and grease
• Cleaning chemicals
• Dust
• Outdoor weather
• Thermal cycling

Determine the Required Thickness

Thicker foam can accommodate larger gaps and surface irregularities, but it may also increase movement under load.

Check the Required Compression

Gasket tapes require sufficient compression to form an effective seal without permanently crushing the foam.

Consider the Required Service Life

For demanding or long-term applications, acrylic adhesive may offer better ageing performance than economical hot-melt adhesive.

Test the Actual Surface

The tape should be tested on the actual production surface because paint, powder coating, oil, dust and surface texture can significantly affect adhesion.

Correct Foam Tape Installation

For reliable adhesion:

1. Clean the surface to remove oil, dust and moisture.
2. Allow the surface to dry completely.
3. Apply the tape within the recommended installation-temperature range.
4. Avoid touching the adhesive with fingers.
5. Apply firm and even pressure.
6. Avoid stretching the foam during installation.
7. Ensure full contact across the bonded surface.
8. Allow the adhesive sufficient dwell time before applying full load.
9. Test the bond before production use.
10. Follow the product-specific technical instructions.

Pressure-sensitive adhesive develops its bond through surface contact. Insufficient application pressure can significantly reduce adhesion.

Foam Tape Supply Across the UAE

Blueline supplies foam tapes throughout:

• Dubai
• Abu Dhabi
• Sharjah
• Ajman
• Ras Al Khaimah
• Fujairah
• Umm Al Quwain
• Al Ain

As a premier foam tape manufacturer UAE and trusted industrial foam tape supplier Sharjah, we deliver high-performance adhesive solutions engineered for demanding regional projects. Recognized as a leading foam tape supplier in UAE, our factory inventory includes high-strength double-sided PE foam tape UAE stock designed for heavy-duty bonding.

For specialized industry applications, we supply premium nitrile foam tape for HVAC UAE ductwork sealing, robust waterproof foam sealing tape UAE rolls for outdoor weatherproofing, and high-tack acrylic foam tape for structural glazing Dubai developments—ensuring top-tier performance for every foam tape supplier Dubai client.

Foam Tape Supply in Saudi Arabia

We support customers and projects across:

• Riyadh
• Jeddah
• Dammam
• Al Khobar
• Dhahran
• Jubail
• Makkah
• Madinah

Saudi clients can depend on Blueline as a leading double-sided foam tape supplier Saudi Arabia industries trust for premium adhesive solutions. We deliver comprehensive adhesive tape manufacturing support for Riyadh projects, offering specialized inventory as a primary acrylic foam tape supplier Dammam fabricators rely on.

Whether you need EVA foam tape suppliers Jeddah businesses count on or a certified EPDM foam tape supplier Saudi Arabia contractors prefer, Blueline provides engineered adhesives designed for regional extremes. Our inventory features high-performance options including high-bond acrylic foam tape Saudi Arabia builders specify, high-temperature acrylic foam tape Saudi Arabia plants require for severe heat environments, and heavy-duty HVAC duct gasket foam tape for air distribution systems across the Kingdom.

Export packaging and project-based deliveries can be arranged according to the order quantity and agreed commercial terms.

Why Choose Blueline International?

Multiple Foam Materials

We supply EVA, PE, EPDM, nitrile, PVC and acrylic foam-tape products.

Application-Focused Selection

Products are selected according to the substrate, temperature, exposure and required function.

Custom Dimensions

Custom thicknesses, widths and roll lengths can be manufactured according to project requirements.

Adhesive Options

Acrylic, hot-melt and other adhesive systems are available according to the application.

Industrial Converting

Slitting, laminating, die cutting and custom gasket fabrication can be arranged.

UAE and Saudi Arabia Supply

We support contractors, manufacturers and industrial customers across both markets.

Information Required for a Quotation

Please provide:

1. Foam material
2. Foam colour
3. Tape thickness
4. Tape width
5. Roll length
6. Single-sided or double-sided adhesive
7. Adhesive type, if specified
8. Required foam density
9. Application
10. Substrate material
11. Operating-temperature range
12. Indoor or outdoor exposure
13. Required quantity
14. Delivery location
15. Applicable technical specification

If you are unsure which material to select, send us your application details for review.

Request Foam Tape Samples and Pricing

Looking for foam tape for HVAC ducting, glazing, sealing, insulation, mounting or industrial assembly?

Contact Blueline International with your required size, quantity and application.

Email: ask@blineintl.com
Website: www.blineintl.com
Supply coverage: UAE and Saudi Arabia

[REQUEST A QUOTATION]

Frequently Asked Questions

Which foam tape is suitable for HVAC duct flanges?

Closed-cell EVA, PE, EPDM or PVC foam tape may be suitable depending on the operating temperature, flange design and project specification. The tape should provide adequate compression recovery and adhesive durability.

What is the difference between EVA and PE foam tape?

EVA foam is generally softer and more flexible, while PE foam can provide a more uniform closed-cell structure and is widely used for mounting and sealing. Final performance depends on density and formulation.

Is EPDM foam tape suitable for outdoor use?

EPDM generally offers excellent resistance to weather, ozone and UV exposure, making it suitable for many outdoor sealing applications.

Is nitrile foam tape suitable for HVAC insulation?

Yes. Nitrile foam tape can be used with compatible NBR insulation systems for joints and sealing support. Installation should follow the insulation-system requirements.

What is the best adhesive for long-term HVAC applications?

A suitable acrylic adhesive generally offers better resistance to heat and ageing than basic hot-melt adhesive. The correct choice depends on the temperature, substrate and service conditions.

Can foam tape be used for structural glazing?

Spacer foam tape can be used as part of an approved structural silicone glazing system. It must not replace the structural silicone unless the complete bonding system has been specifically tested and approved.

Do you supply VHB tape in Saudi Arabia?

Blueline can supply high-bond acrylic foam tapes. VHB is a registered trademark, so an alternative acrylic foam tape should not be represented as branded VHB unless supplied under the original brand.

Is closed-cell foam tape waterproof?

Closed-cell foam generally has low water absorption and can help form a water-resistant seal when properly compressed. Suitability for continuous immersion or hydrostatic pressure requires specific testing.

Can you manufacture custom-width foam tape?

Yes. Foam tape can be slit to custom widths and supplied in different thicknesses and roll lengths, subject to production capability and minimum quantities.

Do you supply single-sided and double-sided foam tape?

Yes. Single-sided tapes are commonly used for gasketing and sealing, while double-sided tapes are used for mounting and joining.

How can I obtain an EVA single-sided foam tape price?

Provide the thickness, width, roll length, density, adhesive type and quantity. These factors determine the final price.

Why does foam tape fail to stick?

Common causes include dust, oil, moisture, low installation temperature, unsuitable adhesive, insufficient pressure, incompatible surfaces or loading the bond before the adhesive develops strength.